How Cut Graphite Gasket

First, the tectonic
High-strength metal dash board by the gasket and flexible graphite composite particles and then by punching or cutting from.

Second, the performance and features
1, applies to a wide range of operating conditions, high temperature resistance,                      corrosion resistance, resistance to radiation. Can use high-pressure area.
2, in contact with the flange gasket surface and less precision.
3, the sealing performance.
4, the lower gasket preload, and would not adhere to the flange plane, easy to install, thus reducing the labor intensity.

Third, the use of
1, temperature: -200-600 ℃ 

    2, using the pressure :6.4-10 .0 MPa
3, the minimum sealing pressure ratio: y = 30MPa 

    4, gasket coefficient: m = 2  Max Size: ~ 2100mm

Graphite Cut Gasket  is increased from pure graphite sheet and drilling or cutting board made of graphite, it has good corrosion resistance, high / low temperature, good compression resilient and high strength .

Variety of complex geometric circular gasket is widely used in pipes, valves, pumps, pressure vessels, heat exchangers, condensers, generators, air compressors, exhaust pipes, refrigerator and so on.