What are the Two Cleaning Methods of the Multi-Effect Water Distiller?

As a Pharmaceutical Equipment Exporter, share with you.

Multi-effect water distilled water machine has beautiful appearance, reasonable structure, convenient installation and operation, and reliable operation. It is a kind of equipment that uses deionized water as raw material water and uses steam to heat water for injection. It has the advantages of reasonable structure, simple operation, high thermal efficiency, low energy consumption, automatic detection of water quality for injection, etc. The water for injection produced by this machine Stable water quality and high purity. It is used for sterilization and disinfection. It is an ideal equipment for water production in hospitals, pharmaceuticals, electronics, food and beverage industries,  in the pharmaceutical industry.

Pure Steam Generator

The distilled water produced by this equipment has stable quality, high purity and no pyrogen. It is the key equipment of the widely used water injection preparation system. The multi-effect water distiller adopts high temperature and high-pressure operation to ensure stable production of pyrogen-free water for injection. The distilled water produced by the multi-effect water distiller fully meets the requirements of the current US Pharmacopoeia, European Pharmacopoeia, Japanese Pharmacopoeia and Chinese Pharmacopoeia for water for injection.

The two methods for cleaning the multi-effect distilled water machine areas follows:

1. For boiler scale, sulfamic acid (NH2SO2OH) can be used, and deionized water is used to prepare a cleaning solution with a concentration of 1%. The pH value is between 1 and 2 and heated to about 60°C. Phosphoric acid (H3PO4) can also be used. Use deionized water to prepare a 2% concentration cleaning solution and heat it to about 65°C.

2. For silica scale, ammonium difluoride (NH4HF2) can be used, and deionized water is used to prepare a solution with a concentration of 1.5% and heated to 50℃~60℃. It can also use sodium hydroxide + anionic active agent to prepare a cleaning solution with a concentration of 10% and heat it to about 60°C.

Our company also has Pure Steam Generator on sale, welcome to contact us.