Do you Understand Enameled Copper Wire?

As an Enameled Copper Wire Manufacturer, share with you.

Enameled wire is a main type of winding wire. It is composed of a conductor and an insulating layer. After the bare wire is softened by annealing, it is painted and baked many times. However, it is not easy to produce products that not only meet the requirements of the standards, but also meet the requirements of customers. It is affected by the quality of raw materials, process parameters, production equipment, environment and other factors. Therefore, the quality characteristics of various enameled wires are different, but they all have Mechanical properties, chemical properties, electrical properties, and thermal properties are four major properties.

Enameled Copper Wire

Because the production machines of enameled wire are single-end pay-off and single-end take-up, there is no multi-end.

In fact, most of the "multi-threads" are produced by users-electronics factories. During the laying-out process, the machine should be stopped every few minutes to replace the transformer skeleton. When the machine is stopped, the pay-off tension of some machines is not in place. Due to inertia, the upper coil collapses and presses the lower thread. When the machine is turned on again, the thread is pressed and the thread is broken. Formed the initial chaotic line.

After the thread is disconnected, it cannot be used normally, and the spool must be removed from the winding machine. Of course, you can continue to use the processed ones. However, in the process of dealing with the messy thread, if one thread is accidentally broken, it becomes three ends, and two threads are broken, it becomes five ends. As a result, the axis can no longer be processed, and it is returned to the warehouse from the manufacturing process, and the warehouse returns to the production plant in the name of multiple threads. This is the process of "multi-thread" production and return. In fact, multiple thread ends are easy to handle: use a sharp blade to pick and break a few turns of thread, grab the broken thread and pull it up. Until a head appears.

Our company also has Enameled Copper Wire on sale, please contact us.