The Use of Clips

Clips are usually suitable for the packaging process of anchoring agent and ham sausage. These clips can be used smoothly on the carding machine of any Fibrous Casings Clips Manufacturer and play a very important role in product packaging.

Maybe many people don't know what a clevis is. In fact, everyone has seen it, but they don't know its name. In fact, U-shaped clips are widely used. It is mainly used in the packaging process of high-temperature meat and can be carried out effectively. The sealing performance of the medium during storage plays an important role in food packaging.

U-shaped clamps are usually used with Double-Card Sealing Machine and can be used for ham sausage, sealant and both ends of explosive packaging.

The tightness of the U-shaped clip is sufficient, which may require storage performance of the sealed process medium. In addition, the U-shaped clip can also be used in conjunction with a corrosion-resistant double-card sealing machine. All technical indicators exceed the level of similar imported products, which can meet the use of various punches, and the models and specifications are complete.

This sealing machine is widely used in special equipment for sealing technology such as both ends of ham sausage, sealant, and explosive packaging. Its function is to fix the specified type of clip at both ends of the sealing process. After the clamp is tightened, it has sufficient tightness, so the storage performance of the sealed processing medium is required. Clip and card double card sealing machine is a necessary equipment for food processing plants.

U-Shaped Clip

The U-Shaped Clip is mainly used in the packaging process of high-temperature meat food, can effectively seal the storage performance of the process medium, and plays an important role in food packaging. When designing, all editing should not be careless, because it is related to people's food. The following points should be paid attention to when designing:

1. Choose an appropriate amount of deformation. The clamp is installed by the deformation and rebound of the fastener. Too small deformation can easily cause unsafe installation; too large deformation can easily cause installation difficulty or even failure, and damage the clamp. It is very important to choose the correct amount of deformation.

2. When designing, please pay attention to some obvious phenomena, for example, the sound and feeling will change after the clip is installed in place.

3. When designing, please pay attention to the number of constraints of clips. Too many restrictions require higher parts machining accuracy. In the actual assembly process, it is easy to cause incomplete installation

In short, the clip has strict requirements in terms of design. Don't look down on these gadgets.