Process Flow of Fully Automatic Baler

Process Flow of Fully Automatic Baler

For fully automatic balers, it can be applied to many industries. And this is mostly because of its unique way that many companies like it very much, especially the bulk materials industry. For the bulk materials industry, what they are most afraid of is product quality and safety. General packaging equipment cannot effectively guarantee the quality of loose materials. For the straw baler, its unique hydraulic packaging technology can completely achieve aseptic packaging.

The tape is delivered to the position → the binding signal is received → the brake is released, the main motor is started → the right ejector is raised, and the right belt is placed on the slide → the “T” guide is retracted → the proximity switch senses the ejection probe → the main motor stops, Brake pull-in → Packer unwinding belt motor rotates, withdrawing belt for 0.35 seconds → The belt is tightened and tied to the object → The main motor is started twice, the brake is pulled in → The large swing lever is pulled twice, the belt is tightened → the left acrosome is raised.

Tighten the lower layer of tape → the heating sheet extends into the middle of the two tapes → the middle ejector rises, cuts the tape → the middle ejector drops → the middle ejector rises again to make the two straps firmly adhered → the middle ejector falls, and the left and right ejectors descend simultaneously → Heater plate reset → Slide back → “T” -shaped guide plate reset → Proximity switch senses the tape-feeding probe → The tape-feeding motor starts and drives the tape to send the tape → Reset of the large swing bar → The tape is in place and the head is pushed to the “T” -shaped plate The proximity switch senses the double probe → the main motor stops, the brake pulls in → the packer completes a working cycle.

Safe use of fully automatic balers:

Automatic baler & sorting project china still needs human manipulation, monitoring and maintenance. Its operation is in a human-machine environment. From the perspective of safety, we must ensure the safety of people, machines and the environment It is necessary to coordinate human-machine relations to ensure system security. Therefore, in the process of using the automatic baler, pay attention to some safety matters.

The first thing to note is that before operating the baler, the operator must read the instruction manual in detail.

In real life, many people will ignore the role of operating instructions. Even if they consult others, they are unwilling to read the instructions in detail, so they ignore many issues that need attention, and even cause property and personal loss. It should be known that, under the requirements of national regulations, manufacturers will include issues that need attention in the operating instructions. Secondly, when operating the machine, the operator must not place the body parts in a space accessible by the rear folding cover to prevent accidents. Also, for safety, be sure to turn off the power and air supply when installing and removing the tape and during normal maintenance or repair. The last thing to say is untrained personnel. Please do not approach or touch the machine at will, and do not cause unnecessary injuries because of curiosity.

The use of an automatic tie baler machine should not only pay attention to the above, but also pay attention to the design of the mechanical working space. The working space of the packer should ensure that the operator has sufficient room for movement in accordance with psychological and physiological requirements; there should also be enough space and safe passages at dangerous work sites to avoid in unexpected situations.

Qunfeng is specialized in producing internet of things and weighing system, overground or underground vertical waste transfer station system, waste compacting station, arbage sorting equipment, waste transfer station project, single stream waste, paper, plastic, metal baler machine, composting project, weighing apparatus.

If you want to know more about baler machine, you can click here.

https://www.peaks-eco.com/