What are the Maintenance and Repair Skills of the Edible Oil Filling Machine?

The edible oil filling machine must be thoroughly knowledgeable in all aspects of use, and the operation is very proficient. At the same time, it can simply repair some problems. Today Oil Pouch Packing Machine Manufacturers brings four major maintenance and eight major repairs. I hope everyone can learn.

Oil Pouch Packing Machine

No matter what equipment, it needs maintenance. I think everyone understands this. Therefore, in order to get you a better use effect, I will introduce you to the four major maintenance issues of the edible oil filling machine. 

1. If the noise of the machine increases, it means that there is oil shortage or wear in the gears of the machine, and it needs to be replaced or added oil.

2. After use, rinse the remaining cooking oil or disassemble it to clean the dead corners.

3. Do a good job of daily use and maintenance. If you haven't used it for a long time, you should check it before using it, and then run the machine empty, and then perform the rinse test processing.

4. If you do not use the edible oil filling machine every day, you should simply seal the machine after cleaning it up after use, but you must rinse the machine next time to prevent impurities.

All kinds of filling machines are frequently used in filling enterprises nowadays, and as time grows and use accumulation, there will be some faults and problems, so how to deal with them to solve them? For example, when the common edible oil filling machine is filling, the filling problem often occurs. We can solve this problem very well.

1. Whether the magnetic switch is loose, please lock it after each adjustment.

2. Is the speed throttle valve and filling interval throttle valve closed? The throttle valve cannot be closed.

3. Whether all the clamps and hose buckles can be sealed well, please correct them if any.

4. Is there any foreign matter in the quick installation three-way control valve? If so, please sort it out. Is there air in the quick installation three-way control valve and the skin tube of the filling head? If there is air, try to cut or remove the air. 

5. Check whether all the sealing rings are damaged, if damaged, please replace them with new ones.

6. Is the filling speed too fast? Adjust the filling speed throttle valve to lower the filling speed.

7. Whether the valve core of the filling nozzle has the appearance of jamming or delayed opening, if there is a jam, install the valve core from the beginning. If the opening is delayed, the thin cylinder throttle valve needs to be adjusted. 

8. The elastic force of the spiral spring in the fast-installed three-way control valve is compressed up and down. If the elastic force is too large, the check valve will not open.

Our company also has Oil Pouch Packing Machine on sale, welcome to contact us.