In the indoor environment, as much floor as there is, there will be as much ceiling as possible. In terms of area, their status should be equal. But I have to admit that people pay far less attention to the ceiling than the floor, and ceiling decoration is a very easy link that we ignore. The main reason is that we always walk on the floor, without direct contact with the ceiling. But in fact, a large part of the effect of home decoration comes from the application of ceiling. Although it does not bear our footsteps, it has to bear more eyes.
For the ceiling of the room, under normal circumstances, people would choose gypsum board, while Aluminum Ceiling Panel are more used in the kitchen and bathroom. One is that you may think that metal materials are cold and hard. The second reason is that people ignore the ceiling. However, as the integrated ceiling has become a new trend of living room ceilings, it is composed of metal square plates and electrical appliances, which integrates heating, lighting and ventilation. The integrated ceilings are mostly made of aluminum gussets, so a good aluminum ceiling can make the decoration more perfect!
In fact, if selected and designed properly, aluminum ceilings can bring great effects to every space in the home. Relatively speaking, the Film Covered Aluminum Ceiling Panel is lighter and more durable than other materials such as gypsum board. If you live in a house for a long time, you may encounter the problem of roof bleeding, and in humid seasons and places, the roof will crack and peel due to the erosion of water vapor, and aluminum ceilings will not have these problems. . Therefore, people often leave the aluminum ceiling in a space with a lot of water vapor.
The finished aluminum ceiling is a trough-shaped metal strip, which needs to be spliced to produce an effect. Therefore, it can flexibly deal with various situations, such as the setting of lamps and the arrangement of pipelines.
Film Covered Aluminum Ceiling Panel
Many consumers have misunderstandings about purchasing, thinking that the thicker the aluminum gusset, the better, but this is not the case. Some merchants boast that the thickness of their plates reaches 0.8 mm. One is to use consumers' ignorance of the market and to seek large and thick mentality; the other is to cover up their technical defects. If you use aluminum with impure raw materials and poor quality to make the aluminum gusset, the board cannot be thinned evenly. On the contrary, it is impossible to make the aluminum gusset very thin, and you can only make it thicker.
In fact, no matter how good the quality of the paint is, it will be futile if the adhesion to the board is not done well. At present, the surface treatment of aluminum gussets mainly includes the following types: electrostatic spraying, baking varnish, rolling coating, rolling screen printing, film coating, and frosting. If the good paint is peeled off because of weak adhesion, it will not be of any use except to increase our troubles. For Roller Coated Aluminum Ceiling Panel, the effect of spray paint treatment is far from that of baking paint treatment. After baking paint treatment, the adhesion of the paint is stronger. When choosing, we must carefully screen. Generally speaking, painted aluminum ceilings have the same color on the front and back sides, while the painted aluminum ceilings are slightly different inside and outside.
From a practical point of view, the paint on the inside of the aluminum ceiling is equally important. From previous tests, if the ceiling metal rusts, it all starts from the inside, and then spreads to the outside little by little. Moreover, the ceiling with good surface treatment can effectively prevent condensation, and water vapor will not form water droplets on the surface of the ceiling. No one wants those cold water drops to fall into your neck from time to time.
Copyright:@2020-2021
Comments Please sign in or sign up to post.
0
0 of 500 characters used