Main Points of Daily Maintenance of Film Blowing Machine

After the film blowing company officially put into production, in order to achieve the company's expected output, the film blowing machinery in the factory workshop basically kept running. The film blowing equipment running at full load will have a relatively large loss of the body. If the film blowing machine body is not maintained and maintained in time, the film blowing machine will easily cause problems for a long time. So how to do maintenance and maintenance work as a technician of film blowing machine? Now blown film machine manufacturers share some knowledge about how to maintain Plastic Film Blowing Machine.

1.As an operating technician of a film blowing machine, check the temperature of the machine about every 30 minutes to see if it is the standard temperature value at work. If you check the heating appliance when the temperature is too high or too low, please adjust the temperature value in time, which is beneficial to the normal operation of the machine and the quality of the product.

2. Check the traction speed of the Film Blowing Machine every short period of time. If the speed is found to be abnormal, the control should be adjusted in time. This is also a key part of controlling the thickness and quality of film products.

3. Observe the uniformity of the adjusted film thickness and whether the folding diameter meets the standard.

4. Check the air storage cylinder pressure. The required pressure should not be too high, but should reach the standby pressure.

Film Blowing Machine

5. Check whether the ratio of raw materials is standard, whether the mixer is operating normally, and whether the mixed raw materials are uniform.

6. Check the raw materials for impurities. This step must be careful. If the raw materials are mixed with hard objects and impurities, it will not only affect the quality of the product but also easily damage the important internal parts of the film blowing machine.

7. Check the lubricating oil inside the reducer and the air compressor cylinder before the entire unit is running. If the lubricating oil is low, it must be added in time to avoid abnormal heating during operation and burn out.

8. Observe each motor and heating device of the entire unit to see whether its operating status and temperature are normal. If problems are found, they should make a record in time and find a suitable opportunity to stop the unit for adjustment and processing.

The Film Blowing Machine Manufacturer has said that the operator of the film blowing machine needs to have a good working attitude, operate the machine with certain principles, know which equipment is prone to problems, and formulate detailed maintenance and inspection work forms. Doing the above details can not only ensure the good operation of the machine to ensure the quality of the product, but also extend the service life of the machine.