Application of plate shears and matters needing attention

Application of plate shears and matters needing attention

Shearing machine supplied from Sheet Forming Machine Exporter is a kind of shearing equipment widely used in machining. The commonly used plate shears are divided into three types: flat shears, rolling shears and vibrating shears. Among them, plane shears are the most commonly used. Shear thickness less than 10mm plate shears for mechanical transmission, more than 10mm for hydraulic transmission. Single or continuous shearing of metal is usually done by foot or push button. Note when operating the plate shears:

(1) carefully check whether all parts of the plate shears are normal, whether the electrical equipment is intact and whether the lubrication system is smooth before work; Clear the table and surrounding place tools, measuring tools and other sundries and corner waste.

(2) do not operate the plate shears by one person alone, but by 2-3 people to coordinate the feeding, control the dimensional accuracy and take the materials, etc., and make sure that the unified command by one person.

(3) Plate punching marking machine Manufacturer shares that according to the provisions of the thickness of the shear plate, adjust the shear machine scissors clearance. Not allowed to cut two different specifications, different materials of the plate; Do not fold or cut. Shearing sheet material requires a smooth surface, not shearing can not be compressed narrow sheet material.

(4) the belt, flywheel, gear, shaft and other moving parts of the plate shears must be equipped with a protective cover.

(5) the operator of the plate cutting machine should keep at least 200mm away from the scissors mouth with his fingers feeding, and leave the compression device.

The protective fence placed on the trigger shears should not block the cut area from the operator's eyes. After the operation of the waste angular, the operator should be promptly removed, to prevent stab wounds, cuts.