What is the Correct Stacking Method for Ductile Iron Pipes?

Author:beisaimetal 2021-02-01 14:53:45 246 0 0

We all know that ductile iron pipe is a relatively large pipe, and it is more troublesome to store and store, but if you follow the following guidelines, then you will find that storage is actually the same! We still have certain skills in the storage and storage of ductile iron pipes. Let’s share with you the Cast Iron Drain Pipe Manufacturer below!

The criterion for stacking ductile iron pipes is to stack them according to types and specifications under the conditions of stable stacking and safety. Different types of materials should be stacked separately to avoid mixing and mutual corrosion. Stop storing items that are corrosive to steel in the vicinity of the stack. The bottom of the stack should be raised, consolidated, and leveled to avoid moisture or deformation of the data.

Cast Iron Drain Pipe

Cast Iron Drain Pipe

The same types of data are stacked separately according to the order of entry, which is convenient for implementing the first-in-first-ship criterion. For section steel stacked in the open air, there must be wooden mats or slabs underneath, and the stacking surface is slightly inclined to facilitate drainage, and pay attention to the materials to be placed straight to avoid bending and deformation. The stack height does not exceed 1.2m for manual operations, 1.5m for mechanical operations, and 2.5m for stack width.

There should be a certain passage between the stack and the stack. The inspection channel is generally 0.5m, and the access channel depends on the size of the data and the transportation machinery, and the general is 1.5~2.0m. The bottom of the stack is raised. If the warehouse is in the morning cement sky, The elevation of 0.1m is sufficient; if it is a muddy ground, the elevation must be 0.2~0.5m. If it is an open field, the height of cement aerial is 0?3~0.5m, and the height of sand and mud surface is 0.5~0.7m. The channel steel should be laid down, that is, the mouth should be facing down, and the I-beam should be placed upright. The I-slot surface of the steel should not face up, and the ductile iron pipe should be used to prevent water from rusting.

The cast iron drainage pipe has the advantages of small radial size, easy layout, space saving, length can be cut on site to save pipe materials, convenient disassembly and assembly, and maintenance exchange. It has the advantages of high interface strength, good sealing, and strong seismic performance. The unique advantages of drainage pipes are high strength, long life, low noise, strong flame retardancy, flexible seismic resistance, and renewable recycling.

It has been recognized by the society and the market again, and is widely used in high-rise, super-high-rise residences, municipal engineering, hospitals and schools, etc. This is the second rise of cast iron pipes. From the composition of the piping system, cast iron drainage pipes can be divided into three categories: straight pipes, pipe fittings, and auxiliary. Our company also has Cast Iron Drain Pipe on sale, welcome to contact us.



Comments   Please sign in or sign up to post.

0

0 of 500 characters used

Copyright:@2020-2021