How to Prevent Moisture from Entering the Automatic Baler Equipment During Operation?

How to Prevent Moisture from Entering the Automatic Baler Equipment During Operation?

(1) Water corrodes the metal in the hydraulic system of the auto tie baler machine, shortens the service life of the components, and the particles of the corrosion fall into the system, causing wear.

(2) (2) Accelerate the deterioration of oil, especially in the presence of particles such as iron, copper, manganese, etc., and the oxygen in the water and the air rapidly oxidizes the oil to form a viscous polymer, commonly known as sludge. When the use temperature exceeds 65 degrees, the oxidation speed will increase. For every 10 degrees, the oxidation will increase exponentially.

(3) Lubricity is reduced.

Due to the influence of moisture, the content of water in the automatic baler oil is stipulated. The general automatic baler system must not exceed 0.5%, and the requirements for more precise equipment will be higher. We have to keep the hydraulic oil under atmospheric pressure when using the machine.

In addition, in order to reduce the influence of moisture, the fuel tank of the fully automatic baler should be capped as much as possible. Especially for outdoor machines, due to changes in air temperature, the ingress of rainwater should be avoided, and the system should use a hydraulic closed circuit system to minimize the impact of moisture.

The maintenance of recycling baler machine often determines the service life of the machine and the efficiency of the machine. The automatic baler itself is actually classified as a high-precision machine. High, its structural parts must be strictly inspected before it can be mass-produced. The internal irregularity will cause problems and defects in the automatic baler often.

Secondly, it is a matter of moderation of its own use. Everything has a freight cost. The high intensity and overload of the operation make the service life of the automatic baler shorten. Moderate attention should be given.

China mobile waste sorting machine supplier believes that the daily maintenance of automatic balers is the basic work of equipment maintenance and must be institutionalized and standardized. Regarding the regular maintenance work of the fully automatic baler, work quota and material consumption quota shall be formulated and evaluated according to the quota. The regular maintenance work of the fully automatic baler shall be included in the assessment content of the worker contract responsibility system.

The regular inspection of the fully automatic baler is a planned preventive inspection. In addition to the human senses, the inspection method is also performed according to the regular inspection card. Regular inspection is also called regular inspection. Fully automatic baler equipment should also be thoroughly inspected and responded: inspection of oil cylinders, oil pumps, electrical appliances, and various sliding parts. The maintenance of the fully automatic baler should be carried out according to the maintenance procedures. Fully automatic packing machine maintenance regulations are requirements and regulations for the daily maintenance of equipment. Adherence to the implementation of full automatic packing machine maintenance regulations can extend the service life of the equipment and ensure a safe and comfortable working environment.

Qunfeng is a high-tech enterprise dedicated to manufacturing and operation of waste to energy, horizontal waste transfer station project, waste sorting system, waste transfer station system, internet of things and weighing system such as weighing instrument, composting project, environmental equipment.

If you want to know more about waste recycling, you can click here.

https://www.peaks-eco.com/