Precautions for Wearing Protective Clothing

Because some of the Protective Clothing is heavy-duty protective clothing, not only the quality is heavy, but the applicable environmental requirements are also more complicated, so the wearer needs to have good physical and psychological conditions to be competent.

Qualifications for wearers of protective clothing

1. The wearer needs to be healthy.

2. The size of the protective clothing is suitable for the wearer's body.

3. The wearer needs to be trained to understand how to use protective clothing.

Protective Clothing

Precautions for wearing protective clothing

1. The Isolation Protective Clothing must be inspected and air pressure tested to ensure that there are no defects. In addition, the protective clothing must be selected according to the purpose.

2. However, it is necessary. At this time, follow the suggested instructions and apply anti-fogging agent inside the eyeglasses of the protective clothing.

3. Choose two people to cooperative organization, that is, there is another person to help while wearing protective clothing.

4. Underwear should be worn in protective clothing, at least, it is recommended to wear long sleeves and long pants, or long underwear. You should consider wearing fire-resistant underwear.

5. Remove personal items that may damage the protective clothing, such as pens, badges, jewelry, etc.

6. Take off your shoes. Some rubber boots do not allow outdoor shoes to be worn.

7. Roll the trouser legs into the stockings so that you can easily put on the trouser legs of the protective clothing and the long rubber boots.

8. If you use a self-contained air breathing device, check and install the equipment, complete all connections, and adjust according to the manufacturer's requirements. Unless the breathing device requires it, do not wear a face mask.

9. If you use a breathing tube air supply system, check and complete all connections and adjustments, unless the breathing device requires it, do not wear a face mask.

10. Sit and put both legs into the protective clothing.

11. Put both feet into the boots and pull down the splash guard on the boots.

12. Turn on the air supply device, wear a face mask, and make sure that the air supply system is working properly

13. Stand up and tie the inner belt, if any.

14. Put your arms and head into the protective clothing, close the zipper, and then close the zipper to cover.

15. Ask your assistant to check whether the zipper and zipper cover are fully tightened, whether the mask has a clear view, whether all air pipes are tightly connected, and whether the protective clothing is in the best working condition.

Steps to take off protective clothing

1. Leave the work site or hot zone when there is enough air in the Medical Protective Clothing, so that the pollution can be removed safely and the protective clothing should be taken off in time.

2. If the protective clothing comes into contact with toxic chemicals, it must be properly detoxified first, and then the protective clothing should be removed.

3. Take off the protective clothing in the reverse order of putting on the protective clothing. Do not touch the place where the protective clothing may be stained with chemicals.

4. If possible, complete detoxification, cleaning, inspection and air pressure testing of the protective clothing for reuse.

5. If the protective clothing cannot be detoxified, the protective clothing should be discarded in a safe manner.