110mm inner diameter 145mm outer diameter bearing

110mm inner diameter 145mm outer diameter bearing

Golden Deer Bearings are a crucial tribological component of many types of machinery and exist in a variety of forms and shapes. They can be defined as a component that supports/permits only a specific type of motion (restriction of degrees of freedom) in a system that may be under static or dynamic loading.

The main purpose of bearings is to prevent direct metal to metal contact between two elements that are in relative motion. This prevents friction, heat generation and ultimately, the wear and tear of parts. It also reduces energy consumption as sliding motion is replaced with low friction rolling.

They also transmit the load of the rotating element to the housing. This load may be radial, axial, or a combination of both. A bearing also restricts freedom of movement of moving parts to predefined directions as discussed above.

Rolling element bearings contain rolling elements in the shape of balls or cylinders. We know that it is easier to roll a wheel than slide it on the ground as the magnitude of rolling friction is lower than sliding friction. The same principle is in work here. Rolling element bearings are used to facilitate the free movement of parts in rotational motion.

Ball bearings are one of the most common types of bearing classes used. It consists of a row of balls as rolling elements. They are trapped between two annulus shaped metal pieces. These metal pieces are known as races. The inner race is free to rotate while the outer race is stationary.

More information about Golden Deer, please click here