Ten Advantages Of LED Lights

Indoor Led Panel Lights Suppliers will introduce the ten advantages of LED lights.

The lamp body is very small

Energy Saving Led Lamp is a small, very fine LED chip encapsulated in transparent epoxy resin, so it is very small, very lightweight, and can save a lot of materials and space in production and application.

Very low energy consumption

The working voltage of LED lamps is generally only 2~3.6V, and the working current is only 0.02~0.03A. That is to say: the power it consumes does not exceed 0.1W, and the power consumption is more than 90% less than incandescent lamps with the same light efficiency, which is more energy-efficient The lamp is reduced by more than 70%. Therefore, only LED can be called a real energy-saving light source!

Advantage three, strong and durable

LED as an Energy Saving Led Bulb, its chip is completely encapsulated in epoxy resin. The small epoxy particles are extremely difficult to break, and there is no loose part of the entire lamp body; the chip inside is extremely difficult to break, and there is little heat effect that may volatilize and melt. These characteristics make the LED hard to damage. Compared to ordinary bulbs and fluorescent lamps, LEDs can be described as solid, sturdy and countless times durable.

LED A Bulb Light

LED lamp has a long service life

Under the proper current and voltage, the service life of the LED lamp can reach 100,000 hours, that is, the theoretical product life can reach more than 10 years, which has a longer service life than other types of lamps.

Safe low voltage

LED lights use low-voltage DC power supply (AC can be rectified into DC), and the power supply voltage is between 6~24V, which varies depending on the product. In short, it uses a DC power supply that is safer than a high-voltage power supply, and is particularly suitable for homes and public places.

Wide scope of application

Due to its small size, each unit LED chip is a square or a circle of 3~5mm, so it is more suitable for the preparation of devices with complex molding processes. For example, for the production of soft, bendable lamps, lamp strips, and special-shaped lamps, currently only LEDs are suitable.

Richer colors

In the past, the colors of lamps on the market were very single. To achieve color purposes, one was to paint on the surface of the lamp or cover the colored film, and the other was to fill the lamp with inert gas to emit light, so the richness of color was limited. LED is digitally controlled, and the light-emitting chip can emit a variety of colors, including red, green, and blue ternary colors. With these ternary colors, through the system control, the colorfulness of the world can be restored.

Less heat dissipation

LED is a more advanced cold light source. It does not radiate a lot of infrared and ultraviolet rays like incandescent lamps and fluorescent lamps. It is especially suitable for the lighting of valuables such as cultural relics, jewelry, high-end cosmetics and so on. There is almost no current heating effect like an incandescent lamp, and it will not be blown by the influence of thermal expansion and contraction. It will not make the bulbs yellow, accelerate the aging of the lamps, and will not cause a greenhouse effect on the surrounding environment.

Less environmental pollution

The protection of LED for the environment is mainly manifested in three aspects:

First, there is no danger of metallic mercury. LED lamps do not use high-risk mercury like fluorescent lamps, and there will be no public hazards such as mercury ions or phosphors that may leak during the manufacture of the bulb or after damage.

Second, the epoxy resin used to make LEDs is an organic polymer compound. After curing, it has good physical and chemical properties, high bonding strength to wafers and metals, hard and flexible, stable to saline and most solvents, and not easily damaged. Even if it is damaged or aged, it can be recycled and reused without polluting the environment.

Third, the particle layout of LED lamps and display screens, the light generated is generally scattered, and rarely produces light pollution.

More cost-saving

Compared with incandescent lamps, fluorescent lamps, LED lamps purchase price is higher. However, because the energy consumption of LEDs is particularly low, a large amount of electricity can be saved in the long run, and the investment in lamp replacement can be saved, so the comprehensive use cost is more cost-effective.