How do I replace the battery of my iPhone6? iPhone 6 battery replacement tutorial

Some iPhone 6 users say:

After the mobile phone is used for a long time, the iPhone 6 mobile phone runs slower, especially after upgrading the ios11 system, the iPhone 6 speed changes slowly. This is related to the down-clocking of the old mobile phone by the ios11 system, which can be solved by replacing the new battery with the iPhone6.

So, how do you replace the iPhone6battery yourself? Below, I will introduce you to the iPhone 6 battery replacement tutorial.

 I will introduce you to the iphone6 battery replacement tutorial.

Ready to work:

1, first buy an iPhone6 battery online or offline stores, you can buy the original, you can also buy some brand-name higher non-original battery;

2, disassemble tools, mainly including suction cups, screwdrivers, picks and so on. Buying batteries online, general merchants will give a disassemble tool, if you buy offline, you can also ask the merchant to give, if you do not give, you need to buy it yourself.

Do it yourself to iphone6 change battery tutorial

1. Shut down before disassembling the machine, then use the card pin to remove the SIM card holder on the side of the fuselage. Next, use a pentagonal screwdriver to remove the two fixing screws on the bottom of the iPhone6, as shown below.

Second, use the suction cup to suck on the screen and gently pull out the gap, then insert the triangular warp and draw a circle along the screen from the bottom to the top, and lift the edge of the phone, as shown below.

Third, use the suction cup to gently pull up, it is easy to separate the screen of the mobile phone and the panel, here to gently pull, so as not to pull off the screen cable.

4. Continue to remove the metal gland on the screen cable and battery cable with a screwdriver and a clip.

5. Use a crowbar or tweezers to peel off the bottom side of the battery, then use a screwdriver to roll it up and pull it out until it is completely ripped off. Then you can take the old battery out directly.

Sixth, will be demolished, the installation of new batteries is naturally a piece of cake. Simply put, the new battery installation steps are similar, the matching double-sided adhesive to the back of the battery, and the battery cable is pressed into the cable tray, the battery can be attached.

Follow the removal procedure in turn, install the cable and gland, and fix the screws. The entire battery is disassembled and you‘re done!

Finally, close the Apple 6 phone and turn it on to see if it is normal. If everything is normal, then shut it down. Finally, fix the bottom two screws and restore! The replacement of the iPhone6 mobile phone battery by yourself will be completed!