What should I Pay Attention to When Using Adhesive Labels for Winter Storage?

As an Adhesive Labels Wholesaler, share with you. Under normal circumstances, the self-adhesive label itself has very good tackiness, but when the temperature is lower in winter. The tackiness of the self-adhesive label will be directly affected. Features, especially in snowy cold weather, will have a greater impact on the stickiness of the sticker. What should I pay attention to when using Adhesive Labels for winter storage?

Supermarket Price Labels

1. The storage temperature of the label should not be too low. Self-adhesive materials placed outdoors or in cold environments can easily cause frostbite to materials, especially glue parts. Without proper recovery, the tackiness and processing properties of the adhesive will be lost or lost.

2. The processing environment temperature is very important for the material to be processed smoothly. If the temperature is too low, after the viscosity of the material is reduced, poor printing, die-cutting waste tape labeling, stripe flying labels, and dropped labels may occur during processing, affecting the smooth processing of the material.

3. The ambient temperature of labeling should meet the product requirements. Any kind of self-adhesive material has a minimum labeling temperature. Below this temperature, the adhesive tackiness of the self-adhesive is limited, which will cause problems such as inadequate labeling and warping.

4. Tag preset processing is very important in cold regions. If the label's own temperature is low due to transportation and storage conditions that cannot meet the requirements, or even frostbite, although the labeling ambient temperature meets the requirements, because the label status cannot be restored in time, the adhesiveness and processing performance will also be affected. Therefore, in the above case, before processing or labeling operation, the label material should be preset in the labeling environment for more than 24 hours, so that the temperature of the label material itself will rise, and the viscosity and processing performance will be restored.

5. After the labeling is completed, it usually takes some time for the tackiness of the label material to gradually reach its maximum value. It is not advisable to immediately put the labelled container or product in an environment with a large temperature difference. Otherwise, the adhesion of the glue will be affected. In addition, film labels and containers will expand and contract due to temperature changes, while paper labels are more prone to moisture or deformation of paper fibers. These changes are not conducive to the best labeling performance of the glue.

6. Pay attention to the control of labeling pressure and the cleaning of the surface when labeling. A suitable labeling pressure can not only ensure the pressure-sensitive characteristics of the self-adhesive label, but also exhaust the air between the label and the surface to be labeled, so that the label is firm and flat.

Our company also has Supermarket Price Labels on sale, welcome to consult.