Do you know the Maintenance of Automatic Cellophane Overwrapping Machine?

Every time when the system runs automatically in the default mode, it will automatically detect first to confirm whether all cylinders are in the reset state. If it is not in the reset state, the system will alarm and reset all cylinders at the same time; When the operating state is switched to the manual operation state or the two states are switched over, all the cylinders will be automatically reset (ie, the angle of folding, pushing, shaping, easy-drawing, folding up, folding down, cutting, and blowing are reset to the initial state) ; In order to keep the air pressure in a normal state, when the air pressure is insufficient, the system will prompt a message to inform the user that the air pressure is insufficient, the system will not start; the entire system provides two emergency switches, in the event of an emergency, press the emergency stop button, The system will stop all operations, and all operations are prohibited. All operations will not be performed until the emergency stop button is restored after the fault is removed.

Automatic Cellophane Overwrapping Machine

If you want to make it more perfect, you can check the equipment regularly, preferably once a month, to keep the room clean and tidy, do not let the acids and other corrosive gases contained in the atmosphere flow in it, when it is found to have When damaged, it should be repaired at any time. Do not make the Automatic Cellophane Overwrapping Machine work again. You need to keep the whole machine clean and tidy, coated with oil to prevent rust, and cover it with a cloth when not in use.

As a Cellophane Wrapping Machine Manufacturers, share with you. Cigarette box three-dimensional packaging machine features

Cigarette box three-dimensional packaging machine is also known as cigarette box transparent film packaging machine. It is a new generation of cigarette packaging machinery which has been launched by our factory for many years with careful design and application of many patented technologies.

main feature:

1. There is no need to adjust the height of the worktables on both sides of the machine when replacing the mold, and there is no need to disassemble the discharge chain and the hopper. The four-hour mold replacement time of the traditional machine is reduced to only 30 minutes.

2. Adopt a new type of double insurance mechanism, when the machine is out of synchronization, there is no need to stop or damage other parts.

3. The original one-way hand-cranking device prevents the machine from shaking in the reverse direction, and the hand wheel will not rotate during operation, making the operator safer.

4. The new double-rotation film cutter can ensure that the machine can be used continuously for many years without grinding the blade, which overcomes the defect that the traditional fixed single-rotation film cutter blade is easy to wear.

Our company also has Cellophane Packing Machine for sale, please contact us.