What Are The Advantages Of Robotic Welding?

Learned from Industrial Robots Manufacturer that robot welding has the following advantages:

1. Robot welding can improve production efficiency

The Mag Welding Robot has a short response time and rapid action. The welding speed is between 60-3000px/min.

The temperature is much higher than that of hand I welding. The robot does not stop or rest during operation, but when workers go to work,

It is impossible to stop without rest. At the same time, the work efficiency of workers is also affected by factors such as mood. Workers will

Asking for leave, being in a daze, chatting, smoking, going to the toilet, and overtime must be paid for overtime, but robots do not have the above questions.

The problem is that as long as the external water, electricity and other conditions are ensured, you can continue to work, which virtually improves the company’s productivity.

Production efficiency.

2. Industrial Robot welding can improve product quality

During the welding process of the welding robot, as long as the welding parameters and motion trajectory are given, the robot will be precise.

Make sure to repeat this action, welding parameters such as welding current, voltage, welding speed and welding wire length, etc.

The result is decisive.

When using robot welding, the welding parameters of each weld are constant, and the quality of the weld is affected by human factors.

The influence of the element is small, which reduces the requirements for the operation technology of the workers, so the welding quality is stable, thereby ensuring

The quality of the product. In manual welding, the welding speed, wire elongation, etc. are all changed, so it is difficult to do

To the uniformity of quality.

Mag Welding Robot

3. Robot welding can reduce business costs

The cost reduction of welding robots is mainly reflected in large-scale production, and one robot can replace 2

Up to 4 industrial workers, depending on the specific situation of the enterprise, vary. The robot is not fatigued, 24 hours a day

Hourly continuous production, and with the application of high-speed and high-efficiency welding technology, robot welding is used to reduce costs

The more obvious.

4. Robot welding is easy to arrange production plans

Due to the high repeatability of the robot, as long as the parameters are given, it will always act according to the instructions.

Robot welding product cycle is clear, easy to control product output. The production cycle of the robot is fixed.

The production plan is very clear. An accurate production plan should enable the company’s production efficiency and comprehensive resource utilization.

Use to maximize.

5. Robot welding can shorten the cycle of product remodeling

Robot welding can shorten the cycle of product remodeling and reduce the corresponding equipment investment. Small batch can be realized

Welding automation of mass products. The biggest difference between a robot and a special plane is that he can modify the program to adapt

Production of different parts.

When the product is updated, it is only necessary to design the corresponding fixture and robot body according to the updated product.

You don't need to make any changes, as long as you change and call the corresponding program commands, you can update the product and equipment.