DN65 Caliber Waste Water Mechanical Acid Liquid Flow Meter

Product Name

Electromagnetic Flowmeter

Medium

Conductive Liquid

Accuracy

0.2%

Power supply

220VAC/ 24VDC

Output

4-20mA /RS485

Application

Measuring

Connection

Thread

Material

Stainless Steel

Type

Integral

SUS316

For industrial water, domestic water, sewage, corrosive media, widely used in petroleum, chemical, urea, vinylon and other industries.

Stainless steel coated tungsten carbide

For non-corrosive, highly abrasive media

Hastelloy B(HB)

Hydrochloric acid of all concentrations below the boiling point has good corrosion resistance, but also sulfuric acid, phosphoric acid, hydrofluoric acid, organic acids and other non-oxidizing acid, alkali, non-oxidizing salt solution corrosion.

Hastelloy C(HC)

Oxidative acid, such as nitric acid, mixed acid or chromic acid and sulfuric acid mixed medium corrosion, but also resistant to oxidizing salts such as Fe +++, Cu ++ or other oxidants such as hypochlorite solution above sea level, sea water corrosion

titanium(Ti)

It is resistant to seawater, various chlorides and hypochlorites, oxidative acids (including fuming nitric acid), organic acids, alkalis, etc, and is not resistant to the corrosion of pure reducing acids (such as sulfuric acid and hydrochloric acid). However, if the acid contains oxidants (such as nitric acid, Fe +++, Cu ++), the corrosion is greatly reduced.

Tantalum (Tan)

Has excellent corrosion resistance, and the glass is very similar, in addition to hydrofluoric acid, fuming nitric acid, alkali, almost all chemical media (including hydrochloric acid, sulfuric acid and aqua regia) corrosion.

Platinum - iridium alloy

Almost applies to all chemicals, but not aqua regia and ammonium salts.