Four Issues that Should be Noted when Selecting Fingerprint Lock

Everyone has different opinions on this aspect. I don't think it's very important. After all, buying electronic locks is for safety and convenience rather than looking good. However, it's best to compare the lock with your own door. It can make the size and color match with the original door more.

If you want to install an electronic lock on an existing door, it must be installed by a dedicated person from the manufacturer and must have local after-sales service. Because replacing the electronic lock on the original anti-theft door generally requires the door to be modified, and it is very troublesome to do without professional tools, and it is not something that ordinary people can do by themselves. In addition, there must be local after-sales service, not afraid of 10,000, just in case, prepare for the future.

Speaking of the manufacturing process, it is not that who does a good look. Unlike buying a mobile phone, aesthetics accounts for a large proportion. The process of locking is mainly to examine its manufacturing process rather than the design process. The focus is on safety and robustness. Durable. The front panel of the electronic lock (the manufacturing process mainly has three kinds from poor to good in order: plastic mold molding, stamping mold molding, die casting mold molding. How to judge? Plastic mold molding is easy to see, and the panel material is hard plastic, this Although the type is not strong and durable, the mold is relatively easy to make, and it often looks good, so some manufacturers who control the cost are still using it. The stamping mold is formed by the Hotel Fingerprint Door Lock that is widely used in hotels and has a market share. The rate is very large. Because it is impossible to count the thickness of the material because it is stamping, it is generally stamped and formed with a very thin steel plate or iron or copper skin. This process is relatively low cost and is used in areas such as hotels that are cared for. It is still enough, but it is less destructive when used in unattended homes. At present, some manufacturers who turn from hotel locks to home electronic locks still use this method of production. The last one, A die-casting mold, is the best choice for household electronic locks. Due to the die-casting method, the panel is very thick, at least 2mm, and One piece is very strong, most people simply do not look ugly out of touch. This technology advantage is durable and resistant to destructive good.

Mobile Smart Door Lock D503

There are several ways to open the door of the electronic lock: password, fingerprint, proximity card, remote control, mobile phone remote, mechanical key. There are many "three-in-one" and even "four-in-one" locks on the market, the so-called password can be opened, and the fingerprint can be opened, the induction card can be opened, and the mechanical key can be opened, the remote control can be opened, etc., you can see the Fingerprint Door Locking Factory is really trying to find a selling point, but in fact, this is a serious misleading. It's not that the more ways I lock and open the door, the better. We just need to choose what we need. It's more wasteful or even unsafe. Personally think that Fingerprint Door Locks are relatively good, mainly because this method is both safe and belongs to It is straightforward to say "no key," which is also good in terms of convenience.