Starch glue for Paper tube dry-free cardboard glue powder green speciality chemicals companies

Starch glue for Paper tube dry-free cardboard glue powder   green speciality chemicals companies

Product Description

This product is imported polymer resins PVA217 and many other polymer materials polymerization, is environment-friendly water-based emulsion adhesive paper, good liquidity, strong initial adhesion, penetration for good controllability of paper , clay and a good film stability and flexibility, and thus the paper tube compression, shear, flexural strength has a good contribution to enhance the finished paper tube hard but not brittle, not wave.

Scope:

General industrial paper tube, chemical fiber paper tube. Paper match: S400, S300, 3A, A grade, class B, B1, B2 grade yarn paper, 

paperboard and other types of grass.

Usage:

( 1 ) for all types of paper tubes, paper tube production line for paper tubes, paper core , paper tube , paper cans produced chemical , 

paper, plastics , packaging, textile, printing and dyeing industry used ;

( 2 ) for all types of paper angle production line ;

( 3 ) suitable for the production of paper sheeting , honeycomb core , paper trays, etc. ;

( 4 ) suitable for high -grade cardboard boxes, paper production line ;

( 5 ) for a variety of manual , automatic volume control pagoda pipe machinery ;

Do flocking using diluted ( 6 ) add water .

Technical Specifications : PH value 5-6 ; Viscosity : 1600 ~ 3000pa / s (25 °C); solid content: 25 ~ 30% ; congealing point 0 ~ -2 °C;

Usage: 1 ) applies to pump irrigation type, roll -formed and full immersion sizing , use glue to be uniform, scraping gum to clean, 

the amount of adhesive to 60 ~ 80g / square meter appropriate.

2) After drying paper tube , its strength will be significantly improved to 3-inch pipe wall thickness of 13mm ( Class B paper yarn ) , 

for example, the plane strength 1500N, after drying up 2500N;

3 ) viscosity and solid content indicators that can be adjusted based on the user machine speed and the use of paper required ;

4 ) In case of long-term storage or layered crust , can be used after mixing evenly, does not affect the results ;

5 ) This product is stored in the room is appropriate, in the event of slight freezing in winter , you can use the heat stirring ;

6 ) The strains of water-based emulsion liquid , non-toxic , tasteless, such as spilled on clothing can be washed off with water .

Packing: plastic drum 50 ± 1KG;

Storage: Indoor airtight storage, avoid direct sunlight , can not be mixed with other binders .

Product characteristics:

Fast speed for initial bond, water loss rate in balance, endoplasmic is high strength, not easy distortion, non-softening and high stiffness. 

It is a non-toxic, tasteless, non-flammable, anti-freezing properties of a good water-based adhesives.It's raw material is Polyvinyl Alcohol.  

Usage Scope:

It is ideal adhesive for the paper tube industry. When use it making paper tube, the anti-stress and bond strength can be greatly enhanced. Use this type glue,the paper tue does not need to drying and 

could directly achieve the standard parameters of paper tube technology. This solve the difficult technical problems

 for the large-diameter and super Length of paper tube  drying process.

By using this kind of glue,It save the production cost and time for producing high intension paper tube.

Technical Index

Eco-Resin Note Items:
a. If you find the glue surface crust or watershed.You can stir on average slowly.Then could use as before.  
b. In winter, If you check the phenomenon of glue frozen.Pleae put the glue in drying room or heated with mixing.

Then could use normally as before.

c. Control paper tube adhesive coating 60-80 g / m 2 is appropriate, Glue on pieces of paper should be scraped totally.

d. When the viscosity is too large, You could add water about 3-5%  appropriate.It's better efficency for adding heat water. Adjust it to your needed viscosity, but definitely not add 

more water.Pleae stir the glue before use.

e. Glue must put in indoor for storage, storage temperature control 5°C -40°C.

If storage time exceed half year from the date of production. please test the quality to make sure it's good.Then 

could use again.

FAQ:

What is PVC stabilizer?

Stabilizers are included in PVC to permit its processing and also to boost its resistance specifically in outside applications, weathering, and warmth aging. Likewise, PVC stabilizers have an essential influence on the physical properties of PVC ended up articles.

Polyvinyl chloride (PVC) is among the most crucial industrial plastic however, it is not stable at high temperatures. Therefore, PVC heat stabilizers are extensively utilized to protect vinyl products in all stages by improving the resistance of PVC products at high temperatures.

The role of heat stabilizers

Heat stabilizers play an essential duty to enhance the resistance of PVC substances to heat or high temperatures. The objective of heat stabilizers is to secure the plastic product at all phases. To avoid the destruction of PVC substances, heat stabilizers work by:

Neutralizing hydrogen chloride;

Replacing weakened carbon-chlorine bonds;

Protecting against oxidation;

For more information about Green Chemical, please click here to visit our website.

https://www.shijiachemtech.com/