What must be Done Before Using a High Frequency Vibrating Screen?

As an Ore Dressing Vibrating Screen Exporter, share with you that the high-frequency vibrating screen must be strictly installed.

The preparations required before installation are as follows:

High Frequency Vibrating Mesh Screen

One: Check whether the power supply is out of phase or leakage, and run for 3-5 minutes without load. The power supply is the power supply of the vibration motor. If the power supply fails, the device will not work. Therefore, please check the power supply carefully and find the problem in time.

Two: Check whether the motor power meets the requirements, whether the surface is damaged or deformed, whether the motor bearings are elastic, and whether the motor screws are tightened.

Three: Adjust the angle of the weight of the vibration motor according to the specific gravity and output of the high-frequency vibrating screen material to meet the production needs.

Four: The high-frequency vibrating screen should be installed on a flat ground, if necessary, a ground screw is required.

In addition, attention should be paid to the use of high-frequency vibrating screens in use and maintenance:

1: The high-frequency vibrating screen should be fixed on the anchor screw every day during the operation to ensure that it is not loose. After a total of 1500 hours of operation, check the motor bearings for damage and replace if damaged.

2: The feeding high-frequency vibrating screen should directly feed evenly above the feed inlet. In order to ensure the uniform distribution of the material on the screen surface, the material should not have a large impact force when falling to avoid damaging the screen.

3: The high-frequency vibrating screen should regularly check whether each component works normally during operation.

Due to the increasing use of High Frequency Unit Vibrating Screen, screening dry powder and granular materials has performed very well in industries such as chemical, food, plastic, pharmaceutical, metallurgy, glass, building materials, grain, fertilizer, abrasives, ceramics and other industries. Therefore, the high-frequency vibrating screen is not only the preparation work before installing the vibrating screen, but also the details of installation, use and maintenance. Every tiny detail will affect the operation of the device. Make production impossible. Therefore, the problem should be eliminated in time.

Our company also has High Frequency Vibrating Mesh Screen for sale, please contact us.