How To Maintain And Maintain The Welding Robot?

Let's follow the Industrial Robots Manufacturer to see how the Mag Welding Robot is maintained and maintained?

Daily inspection and maintenance

1. Wire feeding mechanism. Including whether the wire feeding force is normal, whether the wire feeding catheter is damaged, and whether there is abnormal alarm. 2. Whether the gas flow is normal. 3. Whether the torch safety protection system is normal. (It is forbidden to turn off the welding torch for safety protection) 4. Whether the water circulation system works normally. 5. Test TCP (it is recommended to prepare a test program to run after each shift)

Arc Welding Robot

 Weekly inspection and maintenance

1. Scrub each axis of the Industrial Robots. 2. Check the accuracy of TCP. 3. Check the residue oil level. 4. Check whether the zero position of each axis of the robot is accurate. 5. Clean the filter behind the welder water tank. 6. Clean the filter at the inlet of compressed air. 7. Clean the impurities at the nozzle of the welding gun to avoid blocking the water circulation. 8. Clean the wire feeding mechanism, including wire feeding wheel, wire pressing wheel and wire guide tube. 9. Check the hose bundle and guide wire hose for damage and breakage. (It is recommended to remove the entire hose bundle and clean it with compressed air) 10. Check whether the welding gun safety protection system is normal and whether the external emergency stop button is normal.

 Monthly inspection and maintenance

1. Lubricate each axis of the robot. White lubricating oil is added to the 1-6 axis. Oil No. 86E006. 2. Add grease to the red grease nipple on the RP positioner and RTS track. Oil No.: 86K007 3. The blue grease nozzle on the RP positioner is filled with gray conductive grease. Oil number: 86K004 4. Add lubricating oil to the needle bearing of the wire feed wheel. (Small amount of butter is enough) 5. Clean the gun cleaning device and add air motor oil. (Ordinary motor oil is enough) 6. Clean the control cabinet and welding machine with compressed air. 7. Check the cooling water level of the welding machine's water tank, and replenish the cooling fluid in time (purified water plus a little industrial alcohol) 8. Complete all the items in the weekly inspection except for items 1-8.