What is the Difference Between Reinforced Wire Mesh and Steel Wire Mesh?

What is the difference between reinforced wire mesh and steel wire mesh? Next, High-quality Reinforcement Mesh Supplier will explain to you:

Any kind of steel mesh can be used, but the cost will be higher. The thickness of the more commonly used general raw materials is below 3 mm. The smaller the number of knives, the thinner the thickness of the selected raw materials (knife: the specifications of the steel mesh cutting knife, such as $ 40).

Welded wire mesh is a kind of high cost performance, generally cold wire welding is used, without galvanizing, reducing costs. The wire diameter is selected according to the needs, generally it is about one millimeter, and it can be increased or decreased. The aperture is customized according to your requirements.

The crimped wire mesh is similar to the welded wire mesh, but the cost performance is low, because nearly 1/5 of the cost is manual, and the mechanism is burr, which is easy to open.

During the construction, the iron nets should be overlapped, and the joints should be sewed with fine iron wire, otherwise the time will be long, and the cracks will occur here.

1. Reinforced Wire Mesh is a different type of steel mesh used in engineering construction, which is used for pouring concrete structural frames. It is generally composed of long or coiled steel bars.

2. Steel wire mesh is a mesh product produced by the factory, which is used for various purposes, such as filtering, enclosure, and transmission.

The wire warp of the steel wire mesh is made of finer wire warp. The mesh is made by the weaving process. The mesh size is uniform, the size is used within the calibrated range, and the mesh surface has soft effect characteristics under the firm effect. 

The raw material used to make the steel mesh is round steel, screw steel material, or welded into a mesh that intersects with the warp and weft crosses. Under the premise that the spacing between the meshes is large, the thicker wire warp will form an overall construction than the steel mesh Meshes with smaller holes are also stronger.

Steel wire mesh is usually used in plastered concrete for building walls to prevent cracking and delamination of the walls to expose bricks. The use of steel wire mesh on the wall shows its role in buildings.

Reinforced mesh is usually selected on the ground and corners of the building to reinforce the walking cracks of the building, causing unnecessary construction and unqualified buildings.

The advantages and functions of reinforced mesh:

Welded steel mesh is a mesh in which longitudinal steel bars and transverse steel bars are arranged at a certain distance and at right angles to each other, and all intersections are welded together.

Germany Standard Reinforcing Mesh

Reinforced mesh advantages:

1. Significantly improve the quality of reinforcement engineering

2. Significantly increase the construction speed

3. Enhance the crack resistance of concrete

4. Has good comprehensive economic benefits

The role of reinforced mesh:

1. Significantly improve the quality of reinforcement engineering

Reinforced mesh is manufactured by fully automatic intelligent production line under strict quality control of the factory. Mesh size, reinforcement specifications and quality are strictly controlled. It avoids the omission of manual ties, errors in ties and cutting corners. The mesh has high rigidity, good elasticity, uniform and accurate spacing, and high welding point strength, thus greatly improving the quality of the project.

2. Improve seismic and crack resistance

The longitudinal and transverse ribs of the welded steel mesh form a mesh structure, so it has good anchorage with the concrete and the load is evenly distributed. The seismic resistance of the reinforced concrete structure is significantly improved. According to the actual test, the welding of reinforced steel mesh on the road can reduce the occurrence of cracks by more than 75% compared with the artificial help mesh.

3. Save the amount of rebar

The use of rebar welded mesh can save more than 30% of rebar usage. And the steel mesh needs to be processed after being transported to the construction site, so there is no loss.

4. Speed up the construction progress

The use of welded steel mesh can make the project construction faster. As long as the welded steel mesh is laid as required, the concrete can be poured, eliminating the need for on-site tailoring of the steel bars, placing them one by one, and tying. It can save 50% -70% working hours, greatly speed up the construction progress and shorten the construction cycle. Weihe Welded Wire Mesh has stable quality and fast delivery!

The above is the difference between reinforced mesh and steel mesh introduced by Germany Standard Reinforcing Mesh supplier.