How to Quickly Weld out a Reinforcement Mesh?

Reinforcement Steel Mesh is also called welded steel mesh, steel mesh, steel mesh, steel mesh, etc. It is a mesh in which longitudinal and transverse reinforcements are arranged at a certain distance and at right angles to each other, and all intersections are welded together. The main role is to prevent concrete from cracking. So how is the reinforcement mesh welded out? The following Square Reinforcing Mesh Exporter will come to tell you.

Reinforced welded wire mesh machine is a machine used to produce reinforced welded wire mesh. This machine is a fully automatic numerical control electric box control. It can weld mesh or coil with a width from tens of centimeters to 2.5 meters, and the welding thickness ranges from 3 mm to 12 mm. The mesh can be adjusted from 3 cm, 4 cm, 5 cm, 6 cm, 10 cm, 12 cm, 16 cm, 22 cm, etc. Welding speed is from 5-75 times / minute. This machine is composed of servo motor, transformer, welding head, air pump, pushing trolley, blanking part, shearing machine and other parts. Generally, only one person can operate a wire mesh welding machine. Widely used in coal mine support, breeding, fence protection, construction, hardware manufacturing and other fields.

Reinforcement Steel Mesh

Reinforced wire mesh welding machine is made by welding the thicker steel plate and section steel in the main frame, which makes the main structure stronger and more compact. The weft wire blanking mechanism has a novel structure and adopts a stepping motor to automatically blank, which makes the weft wire placement more accurate. The wire drawing adopts a servo motor wire drawing device, which makes the wire drawing more standard and accurate. Variety of weldable grids. The components related to the zonal grid adjustment are all adjustable. The microcomputer control of the meridional grid adjustment can set different grids. Welding adopts new high-efficiency enclosed water-cooled welded wire mesh transformer with wide voltage adjustment range. In order to adapt to the capacity of the user's main power transformer and reduce the current impact, the welding power electronic control uses a welding sub-control power transmission method, that is, the welding transformer works separately when welding the same weft wire. The welding power electronic control system adopts synchronous control technology. The welding time and the sub-control welding are all composed of digital integrated circuits, which have high control accuracy and high stability. The motor power provides flexible welding pressure at the intersection of the vertical and horizontal lines. Compared with other domestic brands of compressed air powered welding equipment, the welding is smooth, less spattered, and the welding speed is increased. The initial investment, operation and maintenance costs are reduced, and the plant The internal noise is small.

Performance characteristics: The warp and weaving lengths of the rebar mesh welding machine are pre-cut by straightening and cutting machine. The warp is placed from the artificial side to the feeding mechanism, and is automatically driven by the servo feeding trolley, without manual placement. network. The weft thread is manually placed in the discharger by a turntable blanker, and is dropped individually.

The above is the relevant introduction of the machine for welding steel mesh.