Application Method and Advantages of Glass Steel Septic Tank

The Fiberglass Septic Tank is based on synthetic resin and glass fiber reinforced material as the base, which is specially used for the treatment of domestic sewage. FRP septic tank industrial enterprise living room, urban residential area, and other cities were building domestic sewage purification treatment equipment. The excrement is temporarily stored in the glass fiber septic tank so that it is initially decomposed in the tank to reduce the solid content in the discharged sewage. The following Compression Resistance Fiberglass Septic Tank Manufacturer will share with you the use methods and advantages of fiberglass septic tanks.

According to different buildings, the design parameters are calculated by a single project designer. The location of the glass fiber reinforced plastic septic tank should be set; its principle does not affect the building foundation, generally not less than 10m of the domestic drinking water tank. The distance between underground water intake buildings shall not be less than 30m. When the foundation plane of the building is higher than that of the septic tank, the outer wall of the septic tank shall not be less than 2m. When the foundation level of the building is lower than the foundation of the septic tank, the net distance between the outer wall of the septic tank and the outer wall of the building shall not be less than 5m. The entire FRP septic tank should also cover at least 0.3m of soil. The maximum overlying soil should not exceed 3 meters. In cold areas, when the lowest temperature is lower than the -10 ℃, the soil depth of the septic tank is not less than 12m. In areas where the average temperature in the coldest month is less than -13 ℃ when the designer considers the installation depth of the FRP septic tank, FRP septic The pool should be set below the freezing line in the area.

Fiberglass Septic Tank

Environmental Protection Fiberglass Septic Tank should be installed under green belts, lawns, sidewalks, and covered with soil not exceeding one layer 5 meters; they can also be installed on-road sections. Manhole cover: when there is no vehicle, a light double-layer manhole cover and manhole cover seat is used; when overtaking, a heavy double-layer manhole cover and manhole cover seat is used. FRP septic tanks also take into account the need for greening in the area or the need for road paving. The cast iron or polymer manhole cover is flat with the ground. Where the ground is laid, the manhole cover can be properly reduced below the paving tiles. When the paving tiles on the manhole cover must be opened, the manhole cover needs to be opened. When the volume of the FRP septic tank exceeds 50m3, two single tanks can be set in parallel or in series. If the tanks are connected in series, the design unit and the user must inform the manufacturer in advance to preset, and the distance between the outer walls of the tank, the body should not be less than 500m.

What are the advantages? The FRP septic tank is composed of the factory, mechanization, batch, overall production, new technology, new material, small volume, and large effective volume. The overall shape of the FRP septic tank is lightweight, high strength and easy installation. The glass fiber septic tank saves the land excavation area. The glass fiber reinforced plastic septic tank has good sealing performance can effectively deal with feces, and the anaerobic decomposition effect is more than twice that of the traditional septic tank. The glass fiber reinforced plastic septic tank adopts overall production, with good sealing performance, no leakage, no pollution of surface water, flowers and trees around the septic tank, and no corrosion of wires and cables. High-level siphon drainage, multiple precipitations, multiple purifications. The glass fiber reinforced plastic septic tank uses new material glass fiber, which is resistant to aging, acid, and alkali, and has a service life of more than 50 years. The glass fiber reinforced plastic septic tank is made of international No. 50 steel, sealed with resin, and has a cylindrical shape, which has several times higher compressive strength than polygons and squares. The FRP septic tank is buried, has no power, no maintenance, and no management.