What are the Three Factors that Affect the Service Life of the Filter?

The main factor that affects the life cycle of a filter is how the user uses the filter. If the user does not follow the correct method of use, the normal life cycle of the air filter will be shortened, which cannot often meet the actual needs of the user. The following Hydraulic Filter Supplier will explain the three factors that affect the service life of the high-resistant filter:

Ti Powder Sintered Filter Cartridge

1. Select a high-quality air filter. It is well known that the quality of the air filter determines the life cycle of the device. If the user selects an air filter of low quality, the life cycle of the filter will not be very long.

2. Periodically clean the filter screen of the temperature-resistant filter. When cleaning, you can choose the cleaning method according to the degree of pollution. If a thick layer of dust accumulates on the filter, you can use warm water and a neutral detergent to clean it and use a soft brush to clean it. After cleaning, it should be dried. Never place a fire source to dry. You can use a hair dryer or natural air drying.

3. When installing the temperature-resistant filter, we must pay attention to the matching of each component. Only by ensuring that each accessory meets can we ensure that the filter will not be damaged during use and affect its service life. Fortunately, each component is an original accessory. If a component is damaged, it is better to use the original part when replacing it.

filter element is a professional term for filtration and purification function. In order to purify the resources of the original fluid and the simple separation device of the resource, the filter element is mainly used in oil filtration, air filtration, water filtration and other filtration industries. The filter element separates the solid particles in the liquid or gas, or allows the full contact of different material components to speed up the reaction time, which can protect the normal operation of the equipment or the cleanness of the air. When the fluid enters the filter element with a certain size of filter, its impurities are blocked , And the clean fluid flows out through the filter element. The liquid filter element makes the liquid (including oil, water, etc.) so that the contaminated liquid is cleaned to the state required for production and life, that is, the liquid reaches a certain degree of cleanliness.

According to the different raw materials used, the service life of the filter element will also be different. With the prolonged use time, impurities in the water will clog the filter element, and the activated carbon filter element will be saturated with adsorption. Therefore, generally speaking, the PP filter element needs to be replaced in 3 months, and the activated carbon filter element needs to be replaced in 6 months. Hollow fiber is generally used at the back end of PP cotton and activated carbon because it cannot be cleaned. Otherwise, it is more likely to be blocked. As a sterilization end of the water purification equipment, it needs to be replaced in 1-2 years.

Our company also has Ti Powder Sintered Filter Cartridge for sale, please contact us.