How to Effectively Prevent the Filter Element from Flattening in the Work?

How to effectively prevent the filter element from being sucked and flattened in the work. If the filter element is improperly used or an inappropriate filter element is selected, the filter element will be flattened. How can it be effectively prevented? We have summarized several aspects that may present the above reasons: filter infarction, which was not changed in time.

PP Pleated Filter Cartridge

The filter element is seriously blocked by pollutants in the work and has not been cleaned in time, resulting in a pressure difference of the filter element, and the filter element is not strong enough to cause the filter element to be selected. The filter element selection time is inappropriate for the current working environment, and the filter element accuracy is selected. Too high, or the pressure exceeds its allowable working pressure.

will also cause the phenomenon of flattening of the filter element. Many customers think that the selection of sintered mesh filter element and sintered felt filter element of stainless steel will prevent this situation, but this is not the case. Of course, these two types of stainless steel filter elements have a certain ability to withstand pressure.

But beyond its own ability to resist pressure, it will also show flattening phenomenon. We need to make appropriate adjustments according to the working pressure, such as adding a skeleton, so that the effect will be better. The device is improper, the filter device must be stable, and the filter element is not fixed. Once started the filtration work, so that the filter element was destroyed.

According to China Air Filter Element Supplier, the service life of the filter element will vary according to the raw materials used. The filter element is the core component inside the filter. In the hydraulic system, the filter element is used to filter out solid particles and gel-like substances in the working medium, effectively controlling the degree of pollution of the working medium.

The filter manufacturer believes that the filter of the filter element can be classified into coarse particles according to its filtration accuracy (particle size of impurities). delete). The filter is divided into four types: ordinary filter, precision filter and special filter, which can filter impurities larger than 100μm, 10 to 100μm, 5 to 10μm and 1 to 5μm. As the filter element is used longer, impurities in the water will clog the filter element, and the activated carbon filter element will absorb saturation. Therefore, in general, the filter element needs to be replaced within 3 months, while the activated carbon filter element needs to be replaced within 6 months. Hollow fibers are usually placed in PP cotton because they cannot be cleaned.

Our company also has PP Pleated Filter Cartridge for sale, please contact us.