How to Improve the Efficiency of Heat Resistant Conveyor Belt?

As an Industrial Conveyor Belt Manufacturer, share with you. How to improve the working efficiency of heat-resistant conveyor belt? The first point that must be noted is that the relationship between the diameter of the drive roller and the belt layer of the conveyor belt, the supporting facilities of the drive roller, the redirection cylinder and the provisions on the angle of the buffer roller groove should be based on the design requirements of the heavy helicopter, and the most effective model specifications and specifications selection.

Heat Resistant Conveyor Belt

The second point to note is that the feeder orientation should be along the conveyor belt operating orientation, in order to reduce the impact on the conveyor belt when the raw material falls, the channel should be saved, and the raw material undulation interval should be reduced. Can moderately reduce the buffer roller interval and choose buffer roller method to avoid overflow. Conveyor belts should also use soft and comfortable baffles to prevent the baffles from being solid and scratching the nylon conveyor belt surface of the conveyor belt.

The third thing to pay attention to is to minimize the overload operation of the conveyor belt. Like people, it must be well maintained and properly arranged.

The fourth one should pay attention to check if the conveyor belt has caused the deviation of the direction and the error should be corrected immediately.

Heat Resistant Conveyor Belt is widely used in smelters, decorative building materials, etc. where high-temperature raw materials must be transported. Therefore, it is very important to choose high-quality heat-resistant conveyor belts from the beginning, so how should people choose suitable conveyor belts?

1. When selecting the conveyor belt, the heat resistance level of the selected transmission belt must fully consider the condition of the raw materials transported by the transmission belt. Some large-volume raw materials have higher temperatures, but there is less surface from the transmission belt, and the gap between the middle is quite large. The surface temperature will be lower. However, if you are transporting powdery high-temperature raw materials of small size, the temperature of the surface of the transmission belt is basically the same as the temperature of the raw materials. Therefore, people must fully consider this situation when selecting and choose the best transmission belt;

2. When choosing a suitable heat-resistant transmission belt, not only should we pay attention to the temperature resistance of the transmission belt, but also need to pay attention to whether the process performance of the transmission belt itself is suitable for the pull-resistance work ability;

3. People understand that the thicker the adhesive covered by the surface layer of the high temperature resistant transmission belt, the smaller the probability of damage, and its service life will be longer. All are big commodities, so that you can work in a stronger way.

4. Although the heat-resistant conveyor belt can tolerate a certain high temperature, it is not completely destroyed by high temperature immunity.

Our company also has EP Conveyor Belt for sale, please contact us.