What is the Reason for Wire Breakage When Using Stainless Steel Wire Mesh?

As a Stainless Steel Wire Mesh Supplier, share with you. The stainless steel wire mesh may occasionally show the phenomenon of wire breakage or breakage during the use process. What is going on? In the process of mould on-machine, oil or water is cut off one after another, resulting in a short time running of the mould with a large hole distance, the shrinkage ratio is out of balance, and then the wire is broken. The solution is to add lubricant to each mold in time to ensure its cooling and lubrication.

Fine Stainless Steel Wire Mesh

Mistakes in the scale adjustment of the mold on the machine will cause a disorder of the normal shrinkage ratio during the knitting process, which will constitute a disconnection. The solution is to ensure the machine scale of the mold. A certain block in the mold consumes too fast, and the ratio of the front and back shrinkage in the formation of the knitting is out of balance, showing a flash of broken wire. The first sign is that there are several broken wires in one direction. The solution is to change the mold and adjust the front and back shrinking ratio until it is normal.

When the wicker wire is present in the weaving process, if the take-up speed is too fast, the stainless steel mesh will break. The solution is to transform the mold to ensure that the wicker silk phenomenon does not occur again. Therefore, the structure of the stainless steel wire mesh does not seem to be very messy, it is indeed mixed with the sweat of many dark mesh weaving workers and the fine production technology of the technicians.

Stainless steel wire mesh is used for filtration and screening in acid and alkali environments. The kerosene industry is used in pulp mesh, chemical fiber industry, screen mesh and electroplating.

1. When finishing stainless steel wire mesh, pay attention to the application of packaging materials. In order to effectively guarantee the quality of packaging, the information we use must be strong enough so that there will be no problems when packaging. We should pay attention to this when organizing and organizing.

2. Attention should be paid to the unity of data collection and consolidation. No matter which posture is accepted for consolidation and consolidation, the requirements should be followed. Only this ability can guarantee that the data will not have any problems during application, so pay attention to the processing time.

3. When finishing and finishing stainless steel wire mesh, we also need to control the thickness of the packaging. Don't make it too thick, otherwise the quality of the information will improve, and the processing time will increase a lot of difficulty.

When cleaning and rectifying stainless steel wire mesh, the following matters should be noted. This is the work that all manufacturers should do well in the production process, but only with such abundant production results can the final production be guaranteed.

Our company also has Fine Stainless Steel Wire Mesh on sale, welcome to contact us.