Laser Cutting Machine Maintenance Content And Method.

Good Performance Laser Cutting Machine plays an important role in the manufacturing industry, and its service life directly affects the production speed of enterprises. In the daily use of mechanical equipment, what are the maintenance contents and maintenance methods of the laser cutting machine to facilitate the improvement of the efficiency of the laser cutting machine? If you don't know yet, let the Good Performance Laser Cutting Machine Supplier explain to you:

1. Always check the steel belt to ensure that it is tight. Otherwise, if something goes wrong during operation, people may be injured, and serious death may result. The steel belt looks like a small thing, but the problem is still a bit serious.

2. Check the straightness of the track and the verticality of the machine every six months, and find that it is abnormal and timely maintenance and debugging. Without this, the effect of cutting may not be very good, and the error will increase, affecting the cutting quality. This is the top priority and must be done.

Exchange table fiber laser cutting machine

3. Use a vacuum cleaner to remove dust and dirt inside the machine once a week. All electrical cabinets should be tightly and dust-proof.

4. The guide rails should be cleaned frequently to remove dust and other debris, to ensure that the equipment racks are cleaned frequently, and lubricating oil is added to ensure lubrication without debris. The guide rail should be cleaned and lubricated frequently, and the motor should also be cleaned and lubricated frequently, the machine can move better during cutting, cut more accurately, and the quality of the cut product will improve.

5. The dual focal length laser cutting head is a fragile item on the laser cutting machine. Long-term use will cause damage to the laser cutting head.

Fiber Laser Cutting Machine needs regular inspection and maintenance. If there is deformation or other forms, you should know that the laser cutting head has been damaged a little at this time, and you need to replace it. Failure to replace will affect the cutting quality and increase the cost, and some products may need to be reprocessed to reduce production efficiency. Buy a high-quality laser cutting machine to find a Chinese-Russian laser, and check it carefully when you buy it to avoid problems when it is used.