How to Choose Plywood Sheets?

Plywood sheet is currently the most commonly used wood for hand-made furniture. It can be used as a medium and low-end decorative panel, and it needs to be covered with paint. Plywood sheet, also known as the fine-core board, is a three-layer or multi-layer board-like material made of wood pieces that are peeled into veneers or sliced into thin wood, and then glued together with an adhesive. Usually, odd-numbered veneers are used and made The fiber directions of adjacent layers of veneers are glued together perpendicularly. So how to choose plywood sheet? The following plywood suppliers will bring you plywood purchasing methods for your reference.

How to purchase plywood:

1. The first thing to be investigated is the material of plywood. The price of different tree species is different. We can choose the appropriate variety according to the decoration budget. Any kind of decorative material is in oversupply in the current market. Many low-priced willow eucalyptus core plywood occupies the corner of the material market. This type of plywood is made of poplar core board with surface coloring treatment, and the appearance is similar to that of willow eucalyptus core plywood. The boards are basically the same, but the quality is very different. Both the quality and density of the eucalyptus core board are higher than that of the poplar core, so you must choose carefully when purchasing.

2. Observe whether there are cracks, wormholes, blisters, stains, etc. on the surface of the plywood. Some plywood is stickup the veneer with two different grain together, so when buying, want to see the patchwork seam of plywood whether close, have an uneven phenomenon. Furniture made from cracked plywood will not look good.

3. Since some plywood is made by pasting, it is necessary to observe whether its color can be consistent, whether the texture is consistent, and whether the wood color and the color of the furniture paint are in harmony. The color of the plywood to be purchased should be consistent with the overall effect of the decoration coordination.

4. Check whether the workmanship of the plywood is fine. Since the plywood is made of two veneers pasted together, there must be front and back sides. The surface layer of the plywood should have clear wood grain, and the front side should be smooth and flat. The reverse side should not have a rough and thorny feeling, and it is best not to have nodes. If the plywood degummed, not only affect the construction, will also cause pollution, so in the selection can be used to gently hit the plate, if the crisp sound, the plate is better adhesive, if the heavy sound, the plate degummed phenomenon.