Horizontal Type SYTW600/5-32 Top Pressure Valve Test Bench valve tester valve pressure test machine Valve testing bench Supplier
1) Applicable to gate valve,globe valve,ball valve,Check valve and etc direct-flange connection valves
2) Accessories special sealing disc is applicable to test welded valve’s performance
3) Valve clamping type is up pressure,clamp is through press on the sides of direct-flange connection valves
4) Standard equips with High and low pressure water pump pressure systems,gas supercharging is selection
valve test Equipment FEATURES
1.Product characteristics and application:
This test bench is designed and manufactured with reference to similar products of Germany and GB4981 standard,It is suitable for sealing test of straight-through welded valves and straight- through flange connection valves , before and after installation. It is suitable for shell test, sealing test (low pressure sealing test and high pressure sealing test) and upper seal test (ISO5208) for GB4981, in order to prevent faulty valves from entering work site.
Features: simple operation, safe and reliable, sensitive test.
2.Features:
1) Applicable to gate valve,globe valve,ball valve,Check valve and etc direct-flange connection valves
2) Accessories special sealing disc is applicable to test welded valve’s performance
3) Valve clamping type is up pressure,clamp is through press on the sides of direct-flange connection valves
4) Standard equips with High and low pressure water pump pressure systems,gas supercharging is selection
3. Technical parameters:
Valve Nominal Diameter DN | 100-600mm(straight-through Flange connection valves) |
Maximium Test Pressure PN | 31.5Mpa(4500LB) Max |
Nominal Voltage | Exchange 380V |
Rated Power | 8.5KW |
Line Voltage | Exchange 220V/24V |
Hydraulic oil | N46 hydraulic Oil(provide by user The oil temperature is Max 60 degrees centigrade , Min 5 degrees centigrade |
Oil circuit system Pressure | 28Mpa max |
Test Medium | Water(Allows to add rust inhibitor) kerosene or other liquid it’s viscosity not higher than water |
Test temperature(Envioment Temp) | 5 degree centigrade to 40 degree centigrade |
Transverse clamping Length scope | 950mm |
Radial distance | 100-1350mm |
Max Clamping Force | 220(T) |
Weight | 4.5tons |
Size | 3900×1410×1450(mm) |
4.Operation :
1)Before use, press "pump" first, check motor steering and check whether the action is accurate and reliable.
2) Clamp valve
Valve’s clamping:
a) On the premise of ensuring safety, the valve is hoisted to the test bench working area.
b) Put the suitable sealing ring in the sealing plate according to the tested valve.
c) Put the tested valve in place .
d) Open “forward”postion of the "screw forward and backward"knob, opens "into" position, the screw will quickly move to the end of the valve end 3-5 centimeters after the stop. According to the different length of the valve rotation "screw advance and retreat" "screw forward and back" knob to control the screw to move the sealing disk to the right position.
e) Press the "top tight" button to clamp the valve. Before the pressure, the oil cylinder should be determined not to return, if not returned, should first press the "loose" button to the top pressure cylinder back.
5.Comparison Table for Valve Nominal Diameter and Max Test Pressure
Valve Nominal Diameter DN(mm) | 200max | 250 | 300 | 400 | 500 | 600 |
Max Test PressurePN(MPa) | 31.5 | 28 | 20 | 11 | 7.2 | 5 |
Comparision Table of Valve Sealing Pressure and Test Pressure
SYTW 600/5-32Valve Test Bench Pressure Comparision Table | |||||||||
Norminal Pressure(MPa) | 2.5 | 4.0 | 6.4 | 10.0 | 16.0 | 20.0 | 25.0 | 32.0 | |
Test Pressure(MPa) | 3.75 | 6.0 | 9.6 | 15.0 | 24.0 | 30.0 | 37.5 | 48.0 | |
Norminal Diameter(DN) | Sealing Pressure(MPa) | ||||||||
in | mm | ||||||||
8 | 200 | 2.2 | 3.5 | 5.6 | 8.8 | 14 | 17.6 | ||
10 | 250 | 3.5 | 8.8 | 13.7 | 22.0 | 27.5 | |||
12 | 300 | 5.0 | 8.0 | 12.7 | 19.8 | ||||
14 | 350 | 6.8 | 10.8 | 17.2 | 27.0 | ||||
16 | 400 | 8.8 | 14.0 | 22.5 | |||||
18 | 450 | 11.2 | 17.8 | 28.0 | |||||
20 | 500 | 13.8 | 22.0 | ||||||
22 | 550 | 16.6 | 26.6 | ||||||
24 | 600 | 19.8 |
We are pleased to deliver Valve Testing Machine, Valve Pressure Test Table, Pipe Beveling Equipment, Gate & Globe Valve Core Grinder Tools, Safety Core Valve Tester. Safe payment and on time deliver time will give you.
If you are interested in our valve grinding equipments, you can click here to visit our website.
Previous: Use and Maintenance of Drying Drum for Asphalt Mixing Equipment
Next: Fence Production Process
Copyright:@2020-2021
Comments Please sign in or sign up to post.
0
0 of 500 characters used