Advantages of using Galvanized Perforated Metal Mesh

　　Galvanized Perforated Metal Mesh is a kind of steel mesh that is made of galvanized steel and is drawn by stamping. The surface of the ordinary low carbon steel plate is coated with a layer of metal zinc to prevent the surface of the steel plate from being corroded and prolonged. The service life is called galvanized or galvanized steel in steel.

　　Material: low carbon steel sheet, aluminum plate, stainless steel plate, aluminum-magnesium alloy plate, copper plate, nickel plate.

　　Main uses the construction of ships, bridges, boilers and other platforms, pedals can also be used as reinforcement ribs for pouring cement and light construction materials, as well as heat dissipation hoods and mechanical transmission shields for various vehicles, air compressors, sound, filter Cleaners, air conditioning equipment, satellite antennas, outdoor furniture, mechanical facilities protection, road barriers, architectural decoration, anti-skid platform walkways, etc.

　　Galvanized sheet refers to the plating of a layer of zinc on the steel sheet. Such a steel sheet can last longer, and the galvanized sheet is also hot-dip galvanized and galvanized. Mesh is still very popular with us.

　　First, the hot-dipped galvanized expanded metal mesh is a time- and cost-saving sheet: the hot-dip galvanizing process is simpler and faster than other coating methods, and it also saves the time required to apply on the job site after installation, and The cost of hot-dip galvanizing and rust-proof coatings are also low.

Hot Dipped Galvanized Expanded Metal Mesh

　　In terms of service life, a hot-dipped galvanized expanded metal mesh can be used for a long time, but it is used in different environments, and it can be used for 50 years. Because the toughness of the galvanized layer is strong, and the plating parts are basically galvanized everywhere, this structure can withstand some mechanical damage during use, even in the depression or sharp corners. Good is protected.

　　Finally, the reliability of hot-dipped galvanized expanded metal mesh, because the galvanized layer and the steel plate are metallurgically combined, the zinc layer has become a part of the steel watch, so it also has good reliability and durability.

　　When the “Hot Dipped Galvanized Expanded Metal Mesh” is used for the exterior wall insulation of the exterior wall, the four corner nets are laid in the crack-resistant mortar, so that the anti-crack protection layer of the external wall insulation brick can be enhanced, and then the hot-dip galvanized by the anchor. The steel wire mesh and the structure are directly fixed, and the surface load effect body is transferred, and the surface layer load is transferred to the bottom wall body, and the heat insulation layer can also obtain useful maintenance. When the external force effect is applied, the damage occurs in the crack protection layer and is resisted. The crack protection layer is received.

　　Because of the superior gripping power of hot-dip galvanized steel wire mesh and cement crack-resistant mortar, the hot-dip galvanized steel wire mesh has a reasonable strengthening of the tensile strength of the degree of deflection and vertical deflection, which greatly improves the strength of the bottom layer of the tile. Therefore, the use of "hot-dip galvanized steel mesh reinforcement structure" can be used to co-ordinate the anti-crack function and the requirement of the brick floor to the strength of the bottom layer, and to meet the requirements of the invariance, safety, and durability of the insulation system. We are Galvanized Bar Grating Supplier and welcome to come to us.