How to use the caulking gun?

How to use the caulking gun?

The caulking gun is a simple mechanical device that utilizes the principle of the lever. When used in combination with a rubber bucket or a glue stick, the glue in the rubber bucket can be easily pressed out from the tip, which greatly saves operation time.

The caulking gun is a kind of adhesive sealing caulking tool. According to the packaging type of the glue, it can be divided into soft packaging rubber (sausage soft rubber) and hard rubber (glass plastic) packaging. Widely used in architectural decoration, electronic appliances, automotive and automotive parts, ships and containers.

When the new home is renovated, we always need to use a caulking gun. Many people who use glass glue are not good at causing unsightly or cleaning up. Some families will also play glass glue on their own. Next, the caulking guns manufacturer will come to introduce you how to use the glass glue.

Glass glue tips - how to make glass glue

1. Remove moisture, grease, dust and other contaminants from the surface of the joint. If necessary, clean the surface with a solvent (such as xylene or methyl ethyl ketone), and then wipe off any residue with a clean rag to make it fully clean and dry.

2. Cover the surface near the interface with plastic tape. To ensure that the sealed work lines are perfectly neat.

3. Cut the hose nozzle, install the tip tube, and cut it according to the size of the joint at a 45° angle.

4. Install the caulking gun and keep the rubber at the 45° angle along the gap to ensure that the rubber is in close contact with the surface of the substrate. When the seam width is greater than 15 mm, it is necessary to apply the glue repeatedly. After the glue is applied, the surface is trimmed with a knife to remove excess glue, and then the tape is torn off. If there is stain, it can be removed with a damp cloth.

5. The sealant is vulcanized after 10 minutes at room temperature. It takes 24 hours or more to completely vulcanize, depending on the thickness of the glue and the temperature and humidity of the environment.

Glass glue tips - tips for using glass glue

1. Cleaning work: Before the glass glue is glued, it is necessary to remove the moisture, dust and other dirty things on the surface of the joint. Clean the surface of the two objects that need to be bonded, and keep it dry, then use plastic tape. Cover the interface surface to ensure the perfect and tidy working line of the seal.

2. Specific bonding: cut the nozzle, install the needle-nosed tube, and then cut it according to the size of the joint, at the angle of 45 degrees, and finally install the caulking gun, keep the rubber at a 45-degree angle along the gap to ensure that the rubber is pressed. The compound is in intimate contact with the surface of the substrate when the seam width is greater than 15 mm. It is necessary to apply glue repeatedly. After the glue is applied, the surface is trimmed with a knife to remove excess glue, and then the tape is torn off. If any stains can be removed with a damp cloth.

The above is the entire content of the glass glue technology introduced by the caulking guns suppliers. Many times, we will find granular foreign bodies in the glass glue, some will find bubbles, and some will not dry. These phenomena are all because the glass glue does not have the skills. In addition, the quality of the caulking gun is also related to the effect of the glass glue, we have to choose a good quality caulking gun. If you still want to know more about the product content, you can go to our website to see more information.

China leading manufacturer & exporter of hand tools, garden tools & agriculture tools, main products include industrial hand tools, garden hand tools, such as hammers, pliers, wrenches, screwdrivers, etc.

For more information on hardware tools, click here.

https://www.sinotools.com/