What Causes the Row Welding Machine not to Weld?

As a Fence Panel Welding Machine Wholesale, share with you. The construction steel wire mesh welding machine adopts power electronic synchronous control technology. The welding time and sub-control welding are composed of digital integrated circuits. The control accuracy is high, the performance is stable, the welding spot is firm, and there is no burn marks. The welding speed is fast, and the operation is simple and easy to learn.

Fence Panel Welding Machine

The weft thread is equipped with a precise weft cutting device and an axial positioning device to ensure that the weft yarn has the same length and the edges are neat, and there is no need to trim the edges. The pulling net adopts elastic pulling rod and grid positioning device, which makes the grid fine adjustment easy, the grid size precision is high, and the welding wire aperture can be adjusted arbitrarily within the range.

Cause the welding machine does not weld

Incorrect selection of control attributes

The controller is connected to the welding machine main control line is broken

Control welding switch damaged

Welding control system disorder

Sensor position deviation

Damaged welding sensor

How to do the daily maintenance work of Row Welding Machine?

In the process of using the soldering machine, you should pay attention to the use of mechanical equipment such as the soldering machine, and pay attention to the inspection work, so that the problems of the soldering machine can be found in time, and the maintenance work can be done by solving the problems to ensure that the soldering machine has been In working condition. There are mainly the following two aspects:

Periodic inspection: In the process of using the soldering machine, in addition to daily inspections at home, regular inspections of equipment are also required.

Perform daily inspections: The inspection work of the welding machine is carried out first. Daily inspections are required. Each time the equipment is used for public security, each structure of the equipment is inspected to ensure that the structure of the equipment is not damaged, and to ensure that the status and function of all structural parts are completely normal. . In this way, when the equipment is started to start the operation, the use effect will be normal, and the welding process can be smoothly carried out.

Periodic inspections are divided into inspections before use, monthly inspections of welding machines that are not used for a long time, and maintenance every six months. Among them, the inspection records should be filled in time in the monthly inspection and maintenance every six months, and the equipment defects discovered during the inspection should be dealt with in time according to the defect handling regulations, and the record work should be done.

Our company also has Fence Panel Welding Machine for sale, please contact us.