What Should I Pay Attention to When Maintaining Welding Net Machine?

As an Automatic Welded Wire Mesh Fence Machine Wholesale, share with you. Welded wire mesh machine is mainly used to produce reinforced steel mesh for concrete, such as bridges, water conservancy, highways, national key projects, etc. The width of welded mesh can be up to 2.5 meters, the length can be up to 12 meters, and the welding diameter is 6mm ~ 12mm.

Automatic Welded Wire Mesh Fence Machine

What should I pay attention to when maintaining Welding Net Machine?

Operators of the row welding machine should not put their hands or objects close to the upper electrode being pressurized or placed between the upper and lower electrodes.

The operator of the welding machine must not touch the gears, transmission sheaves, sprockets, belts, chains, straighteners, induction bodies, proximity switches, and electrical cabinets, transformers, etc. of any dangerous voltage with any part of the body or any object close to the drive. Part of the conductor.

Operators of the row welding machine shall not remove or break the zero-connection (earth) safety protection wire on the host and the electric control cabinet, and regularly check whether the zero-connection (earth) safety protection wire is good.

The operator of the row welding machine shall not plug in or touch the power adjustment plug on the welding mesh power transformer, and shall not lift the protective plate.

The operator of the row welding machine shall not adjust the components in the electric control cabinet at will, and shall not put tools, iron wires and other debris into the electric control cabinet or on the top of the cabinet and the rack.

When there is a fuse in the electrical control cabinet of the soldering row, the power should be shut down and the power supply should be shut down first. After the cause of the fuse is detected by the electrician, the fuse core of the same model and specification should be replaced.

The operator of the welding machine should pay attention to seeing, listening and smelling at any time, and discover the signs of accidents and hidden dangers of the equipment in advance. When abnormal phenomena are found, they should be immediately shut down and powered off for inspection and treatment.

The operator of the row welding machine should timely add lubricating oil to the rolling friction parts such as bearings, sliders, slideways, sliding sleeves, sprockets, chains, gears, racks, etc., and must not run without oil. Lubricant filling should be done after shutdown. The parts filled with lubricating oil during operation shall not touch the mechanism in operation with a lubricating appliance, and the method of drip injection may be used.

After using for a period of time, the upper and lower electrodes of the row welding machine will have different degrees of wear or electrical corrosion in the groove. The degree of wear varies depending on the material and wire diameter. When it is more serious, it will directly affect the quality of the solder joint. , Causing false welding or missing welding, users should pay attention to timely maintenance and adjustment. When the upper and lower electrodes cannot be recovered after long-term use, the electrodes need to be replaced.

The operator of the welding machine shall not switch on the welding power supply and start running without the warp and weft. Otherwise, a large short-circuit current will flow between the upper and lower electrodes, which will cause damage to the upper and lower electrodes or the electrical control system.

Our company also has Automatic Welded Wire Mesh Fence Machine for sale, please contact us.